Jacksons Hawk Fasteners

The potentially dangerous conventional bolt retaining clip on the bottom plate has been dispensed with. A patented square shank bolt is fixed into the bottom plate, this feature makes it a very safe product. Fasteners are supplied with 8.8 Hi-Tensile bolts and nuts to ensure high torque ability which provides a better belt joint. All sharp edges are removed to prevent injury during handling. Back and front radiuses of both top and bottom plates are chamfered to ensure scraper friendly fasteners.

.

Jackson’s ‘HAWK’® Conveyor Belt Fasteners
Size	No. 1	No. 1.5	No. 2	No. 2.25	No. 2.5	No. 3
	mm	mm	mm	mm	mm	mm
For Belt Thickness	6-11	11-17.5	16-21	17-30	19-25	23+
Length Of Plate	48	66	83	96	102	114
Width Of Plate	22	27	29	29	38	38
Bolt Hole Centres	25	41	54	67	64	75
Bolt Sizes	6x42	8x47	8x47	8x57	10x59	10x59
Minimum Pulley Dia.	300	450	750	920	1050	1200
Sets Per Box	25 sets	25 sets	25 sets	25 sets	10 sets	10 sets
Weight per box	1.4kg	2.5kg	3.4kg	4.6kg	2.7kg	3.0kg

A full range of templates, application tools and steels available upon request.

Jackson’s ‘HAWK’® Conveyor Belt Fasteners Number of sets per belt width
Belt Width		No. 1	No. 1.5	No. 2	No. 2.25	No. 2.5	No. 3
Inch	mm
12	300	10	8	-	-	-	-
16	405	13	10	9	8	-	-
18	450	15	12	10	9	9	-
20	510	16	13	11	10	10	10
24	610	20	16	14	13	13	13
26	660	22	17	15	14	14	14
28	710	23	18	16	15	15	15
30	760	25	20	17	16	16	16
36	915	30	24	21	19	19	19
42	1065	35	28	24	22	22	22
48	1220	40	32	28	26	26	26
60	1520	50	40	35	32	32	32
72	1830	60	49	42	39	39	39

Site by Second Nature Graphic Design